色99热久久偷拍,av无限看,少妇愉情理伦片丰满丰满

The advantages of ceiling-mounted hot water radiant panels in large-space buildings

time：2025-04-24
hits：445次
source：正弘奧能

Due to the high heating load in large Spaces, the drawbacks of traditional heating methods have become increasingly prominent, such as poor comfort, high energy consumption, difficulty in heat metering, and inconvenience in temperature control for individual households and rooms. Radiant heating is a better way to overcome these drawbacks. Radiant heating is a system that uses the ceilings, walls, floors or other surfaces inside buildings for heating. The radiant heating system mainly supplies heat to rooms through radiant heat dissipation, and its radiant heat dissipation accounts for more than 50% of the total heat dissipation. 
 
The proportion of radiant heat dissipation in the total heat dissipation of various radiant heating methods is approximately as follows: 70% to 75% for ceiling-mounted types. Floor type: 30% - 40% Wall-mounted 30% to 60%(increasing with the height of the radiant panel's position on the wall and the rise in wall temperature). It can be seen that only in the case of ceiling-mounted radiant heating does radiant heat release have an absolute advantage. 
 

	The hot water radiant panel, as an terminal heat dissipation device, does not require electric mechanical components, does not consume electricity, and operates almost maintenance-free, thus saving operating costs. Meanwhile, the hot water radiant panel heating system provides heating for the water system, with low temperature and pressure. It does not increase the fire resistance rating of the building and can be used in volatile and flammable building environments without causing the risk of fire and explosion. Practice has proved that this technology demonstrates extremely high applicability and efficiency in the heating of large Spaces and has been widely applied in numerous projects both at home and abroad.


	 


	<img src="https://www.www.lcd188.com/Uploads/image/20250424/20250424155825_28863.png" alt="" /> 

 
ECOPAN hot water radiant panels promoted and sold by Beijing Leadway Power Co., Ltd. are made of metal tube sheets and prefabricated in the factory into standard lengths of 3 meters and 6 meters (2 meters and 4 meters can be prefabricated for special requirements). Each radiant plate can be connected with a quick coupling. ECOPAN hot water radiant panel adopts an innovative design concept. The pipe, as the warmest part of the panel, is completely downward and 70% of its surface is wrapped by a metal plate (with a wrapping Angle exceeding 280°), which increases the heat transfer area and ensures the heat transfer from the pipe to the plate extremely well. Under the same size characteristics (pipe diameter, quantity and spacing, panel width), ECOPAN hot water radiant panels have higher thermal energy efficiency than other products on the market. 
 
ECOPAN hot water radiant panel heating can meet the heating needs of various high-space places such as industrial plants, aircraft maintenance hangars, warehouses, stadiums, exhibition halls, etc. At present, ECOPAN hot water radiant panels have been applied in the Brilliance BMW Shenyang Parts Distribution Center, Harbin Beer Museum, Qinhuangdao LM Wind Turbine Blade Base and Ulanqab Tennis Hall.

a级片在线观看_欧美一级一级一级_草久中文字幕_国产超碰人人做人人爱_999精品欧美一区二区三区黑人_毛片TV网站无套内射TV网站

The advantages of ceiling-mounted hot water radiant panels in large-space buildings