免费看日本黄色片,国产精品免费久久久久影院仙踪林,浓精喷进老师黑色丝袜

Gas radiant heating is 30%-50% more energy efficient than traditional convection heating

time：2023-06-13
hits：1638次
source：正弘奧能

Due to the large plant area, the steel structure plant heating poor, the environment is more transparent, determines its heating difficulties, in addition, even if the appropriate heating method is found, the cost of heating is also an important issue for users to consider.Therefore, it is a great challenge in the heating design of tall space industrial plants.


	 


	With the development of science and technology, gas radiation heating equipment has overcome this problem.The height of the factory workshop is generally about 10 meters, and even up to 20 meters or more. The traditional convection heating principle is to heat the air first, and then heat the heat to the human body after the air in the whole room is heated. The infrared radiation heat emitted by the gas radiation heating equipment is to directly heat the human body or equipment, and then heat the air through the secondary radiation such as the human body or equipment.The heat distribution is uniform and the heating is rapid, which is very suitable for heating of tall space plants, and can achieve different temperature requirements in different areas of the same plant.This not only saves the cost of equipment, but also greatly saves the cost of use.


	 


	In general, ordinary water heating, floor heating need 2 hours of preheating period, which is a great waste of energy, and gas radiation heating equipment after opening a few minutes will have a warm feeling, half an hour or so will reach the required temperature.The workshop will soon cool down after the general heater or central air conditioning switch is turned off, and the gas radiation heating equipment has the function of heat storage, and can maintain the required temperature within two hours of shutdown.In addition, if you use a heater or traditional heating method, the top of the tall space will be evenly heated, but those Spaces actually do not need to be heated, so it also directly causes a waste of energy.Overall, in a heating season, gas radiation heating can save 30%-50% energy than traditional convection heating.


	 


	IMPRESIND gas radiant heating equipment, promoted and sold by Beijing Leadway Power&nbsp;Co., LTD., uses natural gas and liquefied petroleum gas as fuel, and the heating generator is installed outside the building, which does not increase the fire rating of the building.Therefore, it can be widely used in industrial plants, hangars, maintenance warehouses, warehouses, gymnasiums and other tall buildings.


	 


	<img src="http://www.www.lcd188.com/Uploads/image/20230613/20230613114025_61545.png" alt="" />


	 


	Gas radiation heating equipment is directly installed on the outside of the tall space industrial plant, and the radiation tube is installed on the top of the tall space, which does not occupy the building space.The equipment is standard with all the required accessories, only need to find electrical wiring, no large civil engineering can make the tall space industrial workshop warm throughout the winter.

a级片在线观看_欧美一级一级一级_草久中文字幕_国产超碰人人做人人爱_999精品欧美一区二区三区黑人_毛片TV网站无套内射TV网站

Gas radiant heating is 30%-50% more energy efficient than traditional convection heating